device to connect to the destination using this access pointautomatically.Select Options > Advanced settings and from thefollowing:• Network type — Select the internet protocol type totransfer data to and from your device. The other settingsdepend on the selected network type.• Phone IP address (for IPv4 only) — Enter the IP addressof your device.• DNS addresses — Enter the IP addresses of the primaryand secondary DNS servers, if required by your serviceprovider. To obtain these addresses, contact your internetservice provider.• Proxy server address — Enter the address of the proxyserver.• Proxy port number — Enter the port number of the proxyserver.WLAN internet access pointsSelect Menu > Control panel > Settings andConnection > Destinations > Access point, and followthe instructions on the display. Or, open one of the accesspoint groups, select an access point marked with , andselect Edit.Use the instructions provided by your service provider to editthe following:• WLAN network name — Select Enter manually orSearch for networks. If you select an existing network,WLAN network mode and WLAN security mode aredetermined by the settings of its access point device.• Network status — Define whether the network name isdisplayed.• WLAN network mode — Select Ad-hoc to create an adhoc network, and to allow devices to send and receive datadirectly; a WLAN access point device is not needed. In anad hoc network, all devices must use the same WLANnetwork name.• WLAN security mode — Select the encryption used:WEP, 802.1x (not for ad hoc networks), or WPA/WPA2. Ifyou select Open network, no encryption is used. The WEP,802.1x, and WPA functions can be used only if the networksupports them.• Use access point — Select After confirmation to set thedevice to ask for confirmation before the connection usingthis access point is created or Automatically to set thedevice to connect to the destination using this access pointautomatically.To enter the settings for the selected security mode, selectWLAN security settings.Advanced WLAN settingsSelect Options > Advanced settings and from thefollowing:• IPv4 settings — Enter the IP address of your device, thesubnet IP address, the default gateway, and the IPaddresses of the primary and secondary DNS servers.Contact your internet service provider for these addresses.• IPv6 settings — Define the type of DNS address.Settings© 2008 Nokia. All rights reserved.154
