13 Working with VPNs142 Nokia IP40 User GuideDownload ConfigurationIf you chose Download Configuration in Adding VPN sites by using IP40 Tele 8, a dialog boxappears.1. Click Next, the Network Topology will be downloaded from the specified VPN gateway.The VPN Login page appears.2. Follow steps 9 to 13 in Specify Configuration section to proceed.The VPN Sites page updates with the added VPN sites. If you edited a VPN site, themodifications are reflected in the VPN Sites list.Route All TrafficIf you chose Route All Traffic in Adding VPN sites by using the IP40 Tele 8:1. The VPN Network Configuration dialog box appears with the note, “Only one VPN Profilecan be configured as “Route All Traffic”.2. Check either Download Configuration or Specify Configuration depending on how youwant to obtain the VPN network configuration3. Follow steps 9 to 13 in Specify Configuration section to proceed.Adding VPN Sites by Using IP40 Satellite XYou can define each VPN site according to the function you want IP40 Satellite X to performwhen connecting to the site:VPN Client — Define the VPN site as a Remote Access VPN site using the procedure below.VPN Gateway — Do the following:! Define the second VPN site as a site-to-site VPN gateway by using the procedure below.! Define the first VPN site as a site-to-site VPN gateway.To add or edit VPN sites by using IP40 Satellite X1. In the Navigation Bar, click VPN.The VPN Server page appears.2. In the VPN submenu, click VPN Sites.The VPN Sites page appears with a list of VPN sites.3. Do either of the following:! To add a VPN site, click New Site.! To edit a VPN site, click Edit in the desired VPN site’s row.The IP40 VPN Site Wizard opens, with the Welcome to the VPN Site Wizard dialog boxdisplayed.
