M1112 Administrator Manual Copyright Nokia Networks Oy C33907001SE_003-23.1.1 Ethernet interfaceThe Ethernet interface (ETH) is located on the back panel. TheEthernet interface is a standard 10 Mbit/s half-duplex 10Base-Tinterface. The mechanical connector is an 8-pin RJ-45. The pin-outnumbering is shown in Table 3-1.1 8Figure 3-2 ETH connectorPIN Signal DirectionM1112-EthernetMDI signal1 Rx+ <– Receive data +2 Rx– <– Receive data –3 Tx+ –> Transmit data +6 Tx– –> Transmit data –Table 3-1 Ethernet interface pin-out numbering3.1.2 ADSL interfaceThe ADSL interface (DSL) is compatible with ETSI TS 101 388specification. The mechanical connector is a 6-pin RJ-11. The pin-outnumbering is shown in Table 3-2.1 6Figure 3-3 DSL connector
