M1112 Administrator Manual Copyright Nokia Networks Oy C33907001SE_005-48Ethernet level commandsCommand Switch on/off bridgingDescription Switches on/off bridging.Syntax [no] bridgingArguments no switches bridging off.ExampleM1112(conf-eth)#bridgingM1112(conf-eth)#Command Switch on/off IP function in Ethernet interfaceDescription Switches on/off IP function in the Ethernet interface.Syntax [no] ip address Arguments no switches IP function off.ip-address is the IP address you want to assign tothe Ethernet interface.ip-mask is the subnet mask.ExampleM1112(conf-eth)#ip address 192.168.132.11255.255.255.0M1112(conf-eth)#Command Switch on/off RIP send function in Ethernet inter-faceDescription Switches on/off RIP send function. When enabledM1112 sends Routing Information Protocol messagesto other routers.Syntax [no] ip rip-send {rip-send-mode}Arguments no switches rip-send function off.v1 send-mode selects RIP version 1.v2 send-mode selects RIP version 2.compatible-v1 send-mode selects the sending ofRIPv2 packets using broadcast.ExampleM1112(conf-eth)#ip rip-send v1M1112(conf-eth)#
