Managing M1112 Copyright Nokia Networks OyC33907001SE_00 5-17Routing pageOn the Local Network Routing sub page you can set static routes andenable/disable dynamic routing protocols (Routing InformationProtocol version 1 and 2).To enable dynamic routing to a particular interface select the Routingprotocol version from the pull-down list and click the Apply button.RIP versions 1 and 2 are supported. Send v1-compat. v2 option enablesthe sending of RIPv2 packets using broadcast. Receive v1-compat. v2option enables the receiving of both RIPv1 and RIPv2 packets.To add a static route, type in the Destination network IP address, theSubnet mask of the destination network, and the Gateway and theInterface through which the destination network can be reached. Thenclick the Add new button. There are two static routes in Figure 5-8.Figure 5-8 Local Network Routing page
