GB 8The box for your Mediamaster should contain thefollowing items:• the Mediamaster• a remote control with 2 AAA batteries• a SCART lead (fully featured 1,0 metre)• an Owner’s Manual• a software license agreementINSTALLATION OF THE MEDIAMASTERAbout the SCART socketsThe rear panel of the Mediamaster is equipped with 2 SCARTsockets (see diagram). When you connect other products toany of these sockets, always use fully featured SCART leads(as supplied). There are “less well specified” SCART leads on themarket and picture quality could be reduced if you use them. SCART socketSCART leadOwner’s manual LicenseagrementPreparing the Remote Control• Remove the cover on the battery compartment at the bottomof the remote control.• Insert the 2 AAA (1,5 V) batteries, as shown in the diagram,taking care to observe the + and - markings indicated inside.• Replace the cover.Connecting the MediamasterThere are many different types of TV/VCR and other equipmentthat you can connect to the Mediamaster.In this manual you will see some of the most common ways toconnect your equipment.If you use RF leads you will have to tune your TV and VCR to theMediamaster output channel (see page 12).Remote control