Nokia Mediamaster 9602 S Owner's Manual

Nokia Mediamaster 9602 S Owner's Manual Manual pdf 22 page image

GB 22Antenna Configuration Set-UpIf you have changed your antenna configuration since the firsttime installation you might have to change some settings.Antenna alternative: Select an Antenna alternative from 1 to 8.Please note, that the parameters in the menu are prepro-grammed, but you can change any of them to suit your combi-nation.Name for this satellite: From here you can select a name for theconfiguration.LNB frequency: Selection is possible for different kind of LNBs.Select the frequency for the LNB that is valid for your combina-tion. You may also enter an combination with the number buttonson the remote control.0/12 V antenna switch: Control of an external LNB switch,i. e. switching between two different satellite dishes.DiSEqC input selection: There are in principle two kinds of ex-ternal DiSEqC switches on the market at present. One for con-nection of two LNBs. The other one for connection of up to4 LNBs.If you connect a two input switch, you must be sure that it is ofa so called “Tone Burst” type.If this is the case, selectMini A for the LNB connected to inputA on the switch; selectMini B for the LNB connected to input B.If you have the other switch, defined as “DiSEqC Level 1” on themarket, select DiSEqC 1, 2, 3 and 4 for each LNB connectedrespectively on this switch.InstallationSelect this Menu from the line “Installation” in the Main Menu.The submenu will give you the opportunity to change the prefer-ences performed during first time installation. You can also addfeatures that were not included from the first time installation.Please note that helpful information for every line is given at theend of the menu.Installation Submenus