If you want to set a profile to be active a certain time,select Options > Timed. When the set time expires,the profile changes back to the previously active one.When a profile is timed, is displayed in the standbymode. The Offline profile cannot be timed.In the tones list, select Download sounds (networkservice) to open a list of bookmarks. You can select abookmark and open a connection to a web page todownload more tones.If you want the caller’s name to be spoken when yourdevice rings, select Options > Personalise > Saycaller's name > On. The caller’s name must be foundin Contacts.To create a new profile, select Options > Createnew.3-D tonesPress , select Tools > Utilities > 3-D tones.With 3-D tones, you can enable three-dimensionalsound effects for ringing tones. Not all ringing tonessupport 3-D effects.To enable the 3-D effects, select 3-D ringing toneeffects > On. To change the ringing tone, selectRinging tone and the desired ringing tone.To change the 3-D effect that is applied to the ringingtone, select Sound trajectory and the desired effect.To modify the effect, select from the following settings:● Trajectory speed — Scroll left or right to adjust thespeed at which sound moves from one direction toanother. This setting is not available for all ringingtones.● Reverberation — Select the type of echo.● Doppler effect — Select On to have the ringingtone sound higher when you are closer to yourdevice, and lower when you are farther away. Whenyou get closer to the device, the ringing tone seemsto become higher, and lower when you move awayfrom it. This setting is not available for all ringingtones.To listen to the ringing tone with the 3-D effect, selectOptions > Play tone. If you enable the 3-D tones butdo not select any 3-D effect, stereo widening is appliedto the ringing tone.To adjust the ringing tone volume, select Tools >Profiles > Options > Personalise > Ringingvolume.Modify the standby modeTo change the look of the standby mode, press , andselect Tools > Settings > General >Personalisation > Standby mode > Standby49 Personalise your device
