The screen display changes to match the settings youmake.The available settings vary depending on the selectedcamera.The setup settings are shooting-mode specific.Switching between the modes does not reset thedefined settings.The setup settings return to the default settings whenyou close the camera.If you select a new scene, the colour and lightingsettings are replaced by the selected scene. You canchange the setup settings after selecting a scene ifneeded.Video settingsTo change the main settings, in the video mode, selectOptions > Settings and from the following:● Video quality — Set the quality of the video clip.Select Sharing, if you want to send the video clipusing a multimedia message. The clip is recordedwith QCIF resolution, in 3GPP format, and the size islimited to 300 kB (approximately 30 seconds). Youmay not be able to send video clips saved in theMPEG-4 format in a multimedia message.● Record location — To add GPS location coordinatesto each file, select Yes. Receiving the GPS signal maytake time or the signal may not be available. See"Location information", p. 79.● Video stabilisation — Reduce the effects of thecamera shaking when recording a video.● Audio recording — Select whether to recordsound.● Add to album — Add the recorded video clip to analbum in Photos.● Show captured video — Select to view the firstframe of the recorded video clip after the recordingstops. To view the entire video clip, select Play fromthe active toolbar (main camera) or Options >Play (secondary camera).● Default video name — Enter the default name forcaptured video clips.● Memory in use — Select where you want to storeyour video clips.● Restore camera settings — Restore the camerasettings to default values.86 Camera
