1 — Capture mode indicator2 — Active toolbar (not displayed during imagecapture). See "Active toolbar", p. 78.3 — Battery charge level indicator4 — Image resolution indicator5 — Image counter (the estimated number of imagesyou can capture using the current image quality settingand memory)6 — The device memory ( ) and memory card ( )indicators, which show where images are saved7 — GPS signal indicator. See "Locationinformation", p. 79.Active toolbarThe active toolbar provides you with shortcuts todifferent items and settings before and after capturingan image or recording a video. Scroll to items, andselect them by pressing the scroll key. You can alsodefine when the active toolbar is visible on the display.The settings in the active toolbar return to the defaultsettings after you close the camera.To view the active toolbar before and after capturingan image or recording a video, select Options > Showtoolbar. To view the active toolbar only when youneed it, select Options > Hide toolbar. To activatethe active toolbar when it is hidden, press the scrollkey. The toolbar is visible for 5 seconds.In the active toolbar, select from the following:to switch between the video mode and the imagemodeto select the sceneto switch the video light on or off (video mode only)to select the flash mode (images only)to activate the self-timer (images only). See "Youin the picture—self-timer", p. 81.to activate the sequence mode (images only). See"Capture images in a sequence", p. 81.to select a colour effectto show or hide the viewfinder grid (images only)to adjust white balanceto adjust the exposure compensation (images only)to adjust sharpness (images only)to adjust contrast (images only)to adjust light sensitivity (images only)78 Camera
