© 2006 Nokia. All rights reserved.Internet connections20WLAN connectionWhen you access an application that requires an internetconnection, the device uses the WLAN connections youhave saved by default. If you have not saved any connectionsor they are unavailable, you are asked to select the connection(internet access point) to use. You can save the networkafter selecting it from the list. However, if your WLANnetwork name is set as hidden, you must configure thesettings manually.To define WLAN connections manually, tap , and selectTools > Control panel > Connectivity > Connections > New.The welcome page of the internet setup wizard is displayed.Tap Next to proceed to the Connection setup: Name andtype dialog.1. Define the following settings:Connection name:—Enter a descriptive name forthe connection.Connection type:—Select WLAN2. Tap Next. The device asks whether you want to scan foravailable WLAN networks. Tap Yes to start the scan, orNo to skip it.If you select Yes, all available WLAN networks are shown afterthe scan with information about each WLAN connection:• Security level of WLAN connection:—No security (for example, a public access point inan airport)—Medium security (wired equivalent privacyWEP authentication)—High security (Wi-Fi protected access WPAauthentication, including WPA1 and WPA2)The security level of the network affects the settingsthat are shown when you tap Next.The security icon does not indicate that the datatransmission between the gateway and the content server(or place where the requested resource is stored) is secure.The service provider secures the data transmission betweenthe gateway and the content server.• Name of the WLAN network• WLAN signal strength