request. Select Accept to allow your positioninformation to be sent or Reject to deny the request.LandmarksPress , and select Tools > Connectivity >Landmarks.With Landmarks, you can save the position informationof specific locations in your device. You can sort thesaved locations into different categories, such asbusiness, and add other information to them, such asaddresses. You can use your saved landmarks incompatible applications, such as GPS data and Maps.GPS coordinates are expressed in degrees and decimaldegrees format using the international WGS-84coordinate system.To create a new landmark, select Options > Newlandmark. To make a positioning request for yourcurrent location, select Current position. To enter theposition information manually, select Entermanually.To edit or add information to a saved landmark (forexample, a street address), scroll to a landmark, andselect Options > Edit. Scroll to the desired field, andenter the information.You can sort your landmarks into preset categories,and create new categories. To edit and create newlandmark categories, scroll right in Landmarks, andselect Options > Edit categories.To add a landmark to a category, scroll to the landmarkin Landmarks, and select Options > Add tocategory. Scroll to each category to which you want toadd the landmark, and select it.To send one or several landmarks to a compatibledevice, select Options > Send, and the method. Yourreceived landmarks are placed in the Inbox folder inMessaging.GPS dataGPS data is designed to provide route guidanceinformation to a selected destination, positioninformation about your current location, and travelinginformation, such as the approximate distance to thedestination and approximate duration of travel.Press , and select Tools > Connectivity > GPSdata.The coordinates in the GPS are expressed in degreesand decimal degrees format using the internationalWGS-84 coordinate system.Positioning (GPS)57 Positioning (GPS)
