4. Select Options > Add detail > Share video.5. Enter the SIP address in the formatusername@domainname (you can use an IPaddress instead of a domain name).If you do not know the SIP address for the contact,you can use the phone number of the recipient,including the country code, to share video (ifsupported by the network service provider).UMTS connection settingsTo set up your UMTS connection:● Contact your service provider to establish anagreement for you to use the UMTS network.● Ensure that the UMTS access point connectionsettings for your device are configured properly. Formore information about the settings, contact yourservice provider.Share live video or video clipsDuring an active voice call, select Options > Sharevideo.1. To share live video during the call, select Livevideo.To share a video clip, select Video clip and the clipyou want to share.You may need to convert the video clip into asuitable format to be able to share it. If your devicenotifies you that the video clip must be converted,select OK. Your device must have a video editor forthe conversion to work.2. If the recipient has several SIP addresses or phonenumbers including the country code saved in thecontacts list, select the desired address or number.If the SIP address or phone number of the recipientis not available, enter the address or number of therecipient including the country code, and selectOK to send the invitation. Your device sends theinvitation to the SIP address.Sharing begins automatically when the recipientaccepts the invitation.Options during video sharingZoom the video (available for sender only).Adjust the brightness (available for senderonly).or Mute or unmute the microphone.or Turn the loudspeaker on and off.or Pause and resume video sharing.Switch to full screen mode (available forreceiver only).3. To end the sharing session, select Stop. To end thevoice call, press the end key. When you end the call,video sharing also ends.113 Make calls
