To avoid selecting which access point to use every timethe device attempts to connect to a network, you cancreate a group that contains various access points, anddefine the order in which the access points are used toconnect to a network.For example, you can add wireless LAN (WLAN) andpacket data access points to an internet access pointgroup and use the group for browsing the web. If yougive the WLAN access point the higher priority, thedevice connects to the internet through a WLAN ifavailable and through a packet data connection if not.To create a new access point group, select Options >Manage > New destination.To add access points to an access point group, selectthe group and Options > New access point. To copyan existing access point from another group, select thegroup, scroll to an existing access point, and selectOptions > Organise > Copy to other dest..To change the priority order of access points within agroup, scroll to an access point and Options >Organise > Change priority.Packet data access pointsSelect Menu > Tools > Settings and Connection >Destinations > Access point, and follow theinstructions on the display. Or, open one of the accesspoint groups, select an access point marked with ,and select Edit.Use the instructions provided by your service providerto edit the following:● Access point name — The access point name isprovided by your service provider.● User name — The user name may be needed tomake a data connection, and is usually provided byyour service provider.● Prompt password — If you want to set the deviceto ask for a password every time you log in to aserver, or if you do not want to save your passwordin the device, select Yes.● Password — A password may be needed to makea data connection and is usually provided by yourservice provider.● Authentication — Select Secure to always sendyour password encrypted or Normal to send yourpassword encrypted when possible.● Homepage — Depending on the access point typeyou are setting up, enter the web address or theaddress of the multimedia message centre.● Use access point — Select After confirmation toset the device to ask for confirmation before theconnection using this access point is created, orAutomatically to set the device to connect to thedestination using this access point automatically.Select Options > Advanced settings and from thefollowing:146 Settings
