Connectivity• Server ID — Enter the server ID (shown only if Serverversion is set to 1.2).• Data bearer — Select the connection type: Internet orBluetooth.• Access point (shown only if Data bearer is set toInternet) — Select an access point to use for the dataconnection.• Host address — Enter the IP address of the remotedatabase server.• Port — Enter the server port number (shown only ifData bearer is set to Internet).• User name — Enter your user ID for the synchronizationserver.• Password — Enter your password for thesynchronization server.• Allow sync requests — Select Yes if you want to allowthe server to start a synchronization.• Accept all sync reqs. — Select No if you want yourdevice to ask you before the server starts aWireless LANYour device supports wireless local area network (wirelessLAN). With wireless LAN, you can connect your device tothe internet and compatible devices that have wirelessLAN. For information about using your device in a homenetwork, see "Home network" on page 86.Some places, like France, have restrictions on the use ofwireless LAN. Check with your local authorities for moreinformation.Features using Bluetooth technology, or allowing suchfeatures to run in the background while using otherfeatures, increase the demand on battery power andreduce the battery life.Your device supports the following wireless LAN features:• IEEE 802.11b/g standard• Operation at a frequency of 2.4 GHz• Wired equivalent privacy (WEP) with keys up to 128
