ConnectivityIf you are connected to a wireless LAN, the IAP name isdisplayed. To start the web browser using this IAP, selectthe status and the option Continue Web browsing. To endthe connection in the wireless LAN, select the status andthe option Disconnect WLAN.If wireless LAN scanning is off and you are not connectedto any wireless LAN, WLAN scanning off is displayed. Toset scanning on and search for available wireless LANs,select the status WLAN scanning off.To start a search for available wireless LANs, select a statusand the option Search for WLAN. To set wireless LANscanning off, select a status and the option WLANscanning off.To access the WLAN wizard in the menu, press , andselect Connect. > WLAN wiz..Wireless LAN access pointsTo search for wireless LANs available within range, pressYou can also use Conn. mgr. to create IAPs. See"Connection manager" on page 83.Operating modesThere are two operating modes in wireless LAN:infrastructure and ad hoc.The infrastructure operating mode allows two kinds ofcommunication: wireless devices are connected to eachother through a wireless LAN access point device, orwireless devices are connected to a wired LAN through awireless LAN access point device.In the ad hoc operating mode, devices can send andreceive data directly with each other. To create an internetaccess point for the ad hoc network, see "Access points"on page 106.Connection manager
