Camera24• Statusindicators (1)for audio muteon,stabilizationon, video lightmode, and thecurrentcapture mode.• The toolbar (2),which you canscroll through before recording to select the shootingmode, white balance, and color tone (the toolbar is notdisplayed during recording).• The total available video recording time (3). When youare recording, the current video length indicator alsoshows the elapsed time and time remaining.• The device memory ( ) and memory card ( )indicators (4) show where videos are saved.• The video quality indicator (5) indicates whether thequality of the video is TV (high), TV (normal),Handset (high), Handset (normal), or Sharing.• The video clip file type (6).Tip! Select Options > Turn icons on to display allviewfinder indicators or Turn icons off to displayonly the video status indicators.After you record a video clip, select the following from thetoolbar:• To immediately play the video clip you just recorded,select Play.• If you do not want to keep the video, select Delete.• To send the video using multimedia, e-mail, Bluetoothconnectivity, or infrared, press , or select Send. Formore information, see ‘Messaging’, p. 44 and‘Bluetooth connectivity’, p. 83. This option is notavailable during an active call. You cannot send videoclips saved in the .mp4 file format in a multimediamessage.• To record a new video clip, select New video.Tip! Activate the Offline profile to ensure your videorecording is not interrupted by incoming calls.Video settingsThere are two kinds of settings for the video recorder:Video setup and main settings. To adjust Video setup, see‘Setup settings—adjust color and lighting’, p. 28. The setupsettings return to the default settings after you close thecamera, but the main settings remain the same until youchange them again. To change the main settings, selectOptions > Settings and from the following:Audio recording—Select Off if you do not want to recordsound.ExitOptionsExitOptions