Nokia N93 User Manual

Also see for N93: User guide User guide Get started Additional applications User guide

Contents

Nokia N93 User Manual Manual pdf 86 page image

Connectivity862 Select the item and Options > Send > Via Bluetooth.Devices with Bluetooth technology within range startto appear on the display.Device icons are: computer, phone, audio orvideo device, and other device.To interrupt the search, select Stop.3 Select the device with which you want to connect.4 If the other device requires pairing before data can betransmitted, a tone sounds, and you are asked to entera passcode. See ‘Pair devices’, p. 86.5 When the connection has been established, Sendingdata is shown.The Sent folder in Messag. does not store messages sentusing Bluetooth connectivity.Tip! When searching for devices, some devices mayshow only the unique address (device address). To findthe unique address of your device, enter the code*#2820# in the standby mode.Pair devicesTo open the paired devices view ( ), in the Bluetoothapplication main view, press .Before pairing, create your own passcode (1–16 digits),and agree with the owner of the other device to use thesame code. Devices that do not have a user interface havea factory-set passcode. The passcode is used only once.To pair with a device, select Options > New paired device.Devices with wireless Bluetooth technology within rangestart to appear on the display. Select the device, and enterthe passcode. The same passcode must be entered on theother device as well. After pairing, the device is saved tothe paired devices view.Paired devices are indicated by in the device search.To set a device as authorized or unauthorized, scroll to adevice, and select from the following options:Set as authorised—Connections between your device andthis device can be made without your knowledge. Noseparate acceptance or authorization is needed. Use thisstatus for your own devices, such as your compatibleheadset or PC, or devices that belong to someone you trust.indicates authorized devices in the paired devices view.Set as unauthorised—Connection requests from thisdevice must be accepted separately every time.To cancel a pairing, scroll to the device, and selectOptions > Delete. If you want to cancel all pairings, selectOptions > Delete all.Tip! If you are currently connected to a device anddelete the pairing with that device, pairing is removedimmediately, and the connection is switched off.