Connectivity85Remote SIM modeTo use the remote SIM mode with a compatible car kitenhancement, set Bluetooth connectivity on, and enablethe use of the remote SIM mode with your device. Beforethe mode can be activated, the two devices must be pairedand the pairing initiated from the other device. Whenpairing, use a 16-digit passcode, and set the other deviceas authorized. See ‘Pair devices’, p. 86. Activate the remoteSIM mode from the other device.When the remote SIM mode is on in your Nokia device,Remote SIM is displayed in the standby mode. Theconnection to the wireless network is turned off, asindicated by in the signal strength indicator area, andyou cannot use SIM card services or features requiringcellular network coverage. However, a wireless LANconnection remains active during the remote SIM mode.Warning: In the remote SIM mode, you cannotmake or receive any calls with your device, except makecalls to certain emergency numbers, or use otherfeatures that require network coverage. To make calls,you must first exit the remote SIM mode. If the devicehas been locked, enter the lock code.To exit the remote SIM mode, press , and select Exitrem. SIM mode.Security tipsWhen you are not using Bluetooth connectivity, selectBluetooth > Off or My phone's visibility > Hidden. Inthis way, you can better control who can find your devicewith Bluetooth wireless technology, and connect to it.Do not pair with or accept connection requests from anunknown device. In this way, you can better protect yourdevice from harmful content.Send dataSeveral Bluetooth connections can be active at a time. Forexample, if you are connected to a headset, you can alsotransfer files to another compatible device at the sametime.Bluetooth connectivity indicators• When is shown in the standby mode, Bluetoothconnectivity is on.• When is blinking, your device is trying to connectwith another device.• When is shown continuously, data is beingtransmitted using Bluetooth connectivity.1 Open the application where the item you want to sendis stored. For example, to send an image to anothercompatible device, open Gallery.