3. If you select Bluetooth connectivity: To have yourdevice search for devices with Bluetoothconnectivity, select Continue. Select the devicefrom which you want to transfer content. You areasked to enter a code on your device. Enter a code(1-16 digits), and select OK. Enter the same code onthe other device, and select OK. The devices are nowpaired. See "Pair devices", p. 30.For some device models, the Switch application issent to the other device as a message. To install theSwitch application on the other device, open themessage, and follow the instructions on the display.If you select infrared, connect the two devices.4. From your device, select the content you want totransfer from the other device.Once the transfer has started, you can cancel it andcontinue later.Transferring time depends on the amount of data tobe transferred.Content is transferred from the memory of the otherdevice to the corresponding location in your device.Display indicatorsThe device is being used in a GSM network (networkservice).The device is being used in a UMTS network(network service).You have one or more unread messages in theInbox folder in Messaging.You have received new e-mail in the remotemailbox.There are messages waiting to be sent in theOutbox folder.You have missed calls.The ringing type is set to silent, and the messagealert tone and e-mail alert tone are set to off.The device keypad is locked.A clock alarm is active.The second phone line is being used (networkservice).All calls to the device are diverted to anothernumber (network service). If you have two phone lines,a number indicates the active line.A compatible headset is connected to the device.A compatible TV out cable is connected to thedevice.A compatible text phone is connected to thedevice.A data call is active (network service).A GPRS packet data connection is active (networkservice). indicates the connection is on hold andthat a connection is available. 17 Your device