1 — Capture mode indicator2 — Active toolbar. The toolbar is not displayed duringimage capture. See "Active toolbar", p. 48.3 — Battery charge level indicator4 — Image resolution indicator, which indicateswhether the quality of the image is Print 5M - Large,Print 3M - Medium, Print 2M - Medium, E-mail 0.8M- Med., or MMS 0.3M - Small. The quality of a digitallyzoomed picture is lower than that of an unzoomedpicture.5 — Image counter, which displays the estimatednumber of images you can capture using the currentimage quality setting and memory in use. The counteris not displayed during image capture.6 — The device memory ( ) and mass memory ( )indicators, which show where images are savedActive toolbarThe active toolbar provides you with shortcuts todifferent items and settings before and after taking apicture or recording a video. Scroll to items, and selectthem by pressing the scroll key. You can also definewhen the active toolbar is visible on the display.The settings in the active toolbar return to the defaultsettings after you close the camera.To view the active toolbar before and after taking apicture or recording a video, select Options > Showicons. To view the active toolbar only when you needit, select Options > Hide icons. Only the capturemode and battery level indicators are shown on thedisplay. To activate the active toolbar, press the scrollkey. The toolbar is visible for 5 seconds.Before taking a picture or recording a video, in theactive toolbar, select from the following:to switch between the video and image modesto select the sceneto select the flash mode (images only)to activate the self-timer (images only).to activate the sequence mode (images only).to select a colour effectto show or hide the viewfinder grid (images only)to adjust white balance48 Camera