● Reject call with message — To send a textmessage to a caller informing why you could notanswer the call, select Yes.● Message text — Write a text to be sent in a textmessage when you reject a call.● Image in video call — If video is not sent duringa video call, you can select a still image to bedisplayed instead.● Automatic redial — Select On, and your devicemakes a maximum of 10 attempts to connect thecall after an unsuccessful call attempt. To stopautomatic redialling, press the end key.● Show call duration — Activate this setting if youwant the length of a call to be displayed during thecall.● Summary after call — Activate this setting if youwant the length of a call to be displayed after thecall.● Speed dial — Select On, and the numbers assignedto the number keys (2 to 9) can be dialled bypressing and holding the key. See "Speed dial aphone number", p. 133.● Anykey answer — Select On, and you can answeran incoming call by briefly pressing any keypad key,except the power key, selection keys, zoom/volumekey, or capture key.● Line in use — This setting (network service) isshown only if the SIM card supports two subscribernumbers, that is, two phone lines. Select whichphone line you want to use for making calls andsending text messages. Calls on both lines can beanswered irrespective of the selected line. If youselect Line 2 and have not subscribed to thisnetwork service, you are not able to make calls.When line 2 is selected, is shown in the standbymode.● Line change — To prevent line selection (networkservice), select Disable if supported by your SIMcard. To change this setting, you need the PIN2code.Call divertPress , and select Tools > Settings > Phone >Call divert.Call divert allows you to divert incoming calls to yourvoice mailbox or another phone number. For details,contact your service provider.To activate call divert, select Activate. To checkwhether the option is active, select Check status.Several diverting options can be active at the sametime. When all calls are diverted, is shown in thestandby mode.Call barring and call diverting cannot be active at thesame time.© 2008 Nokia. All rights reserved.160
