availability icon is not shown in the standby mode.However, you can still manually scan for availableWLAN networks and connect to WLAN networks asusual.● If you have set Packet data connection to Whenavailable in connection settings, and there is nopacket data coverage (GPRS), the device periodicallytries to establish a packet data connection. Toprolong the operating time of your device, selectPacket data connection > When needed.● The Maps application downloads new mapinformation when you scroll to new areas on themap, which increases the demand on batterypower. You can prevent the automatic download ofnew maps. See "Maps", p. 91.● If the signal strength of the cellular network variesmuch in your area, your device must scan for theavailable network repeatedly. This increases thedemand on battery power.If the network mode is set to dual mode in thenetwork settings, the device searches for the UMTSnetwork. To only use the GSM network, press ,and select Tools > Settings > Phone >Network > Network mode > GSM.● The backlight of the display increases the demandon battery power. In the display settings, you canchange the time-out after which the backlight isswitched off, and adjust the brightness of thedisplay. Press , and select Tools > Settings >General > Personalisation > Display and Lighttime-out or Brightness.● Leaving applications running in the backgroundincreases the demand on battery power. To closethe applications you do not use, press and hold, scroll to an application in the list, and press C.Pressing C does not close Music player. To closeMusic player, select it from the list and Options >Exit.● To turn on the power save mode, press the powerkey, and select Activate power saving. To turn offthe power save mode, press the power key, andselect Deactivate power saving. You may not beable to change the settings of certain applicationswhen the power save mode is turned on.Free memoryMany features of the device use memory to store data.The device notifies you if the device memory, massmemory, or the memory card memory (if available) islow.To view how much memory different data typesconsume, press , and select Tools > File mgr., the© 2008 Nokia. All rights reserved. 23
