● Restore camera settings — Restore the camerasettings to default values.Colour and lighting settingsIn the active toolbar, select from the following:● Flash mode ( ) (image only) — Select the desiredflash mode.● Colour tone ( ) — Select a colour effect.● Video light — Switch the video light on or off(video mode only).● White balance ( ) — Select the current lightingcondition. This allows the camera to reproducecolours more accurately.● Exposure compensation ( ) (image only) — Ifyou are shooting a dark subject against a very lightbackground, such as snow, adjust the exposure to+1 or +2 to compensate for the backgroundbrightness. For light subjects against a darkbackground, use -1 or -2.● Sharpness ( ) (image only) — Adjust thesharpness of the image.● Contrast ( ) (image only) — Adjust the differencebetween the lightest and darkest parts of theimage.● Light sensitivity ( ) (image only) — Increase thelight sensitivity in low light conditions to avoid toodark images.The screen display changes to match the settings youmake.The available settings vary depending on the selectedcamera.The setup settings are shooting-mode specific.Switching between the modes does not reset thedefined settings.The setup settings return to the default settings whenyou close the camera.If you select a new scene, the colour and lightingsettings are replaced by the selected scene. You canchange the setup settings after selecting a scene ifneeded.Video settingsTo change the main settings, in the video mode, selectOptions > Settings and from the following:● Video quality — Set the quality of the video clip.Select Sharing, if you want to send the video clipusing a multimedia message. The clip is recordedwith QCIF resolution, in 3GPP format, and the size islimited to 300 kB (approximately 30 seconds). Youmay not be able to send video clips saved in theMPEG-4 format in a multimedia message.● Record location — To add GPS locationcoordinates to each file, select On. Receiving the GPS© 2008 Nokia. All rights reserved.72
