Nokia N97 N97 User Manual
                                                                                                                                                     | |
Contents
|
Packet data access pointsSelect Menu > Settings and Connectivity >Destinations > Access point, and follow the instructionson the screen.To edit a packet data access point, open one of the accesspoint groups, and select an access point marked with.Follow the instructions from your service provider.Select from the following:Access point name — You obtain the access point namefrom your service provider.User name — The user name may be needed to make adata connection, and is usually provided by your serviceprovider.Prompt password — If you must enter the passwordevery time you log in to a server, or if you do not want tosave your password in the device, select Yes.Password — A password may be needed to make a dataconnection and is usually provided by your serviceprovider.Authentication — Select Secure to always send yourpassword encrypted or Normal to send your passwordencrypted when possible.Homepage — Depending on the access point you aresetting up, enter the web address or the address of themultimedia message centre.Use access point — Select After confirmation if youwant the device to ask for confirmation before theconnection using this access point is created, orAutomatically if you want the device to connect to thedestination using this access point automatically.Select Options > Advanced settings and from thefollowing:Network type — Select the internet protocol type totransfer data to and from your device. The other settingsdepend on the selected network type.Phone IP address (for IPv4 only) — Enter the IP addressof your device.DNS addresses — Enter the IP addresses of the primaryand secondary DNS servers, if required by your serviceprovider. To obtain these addresses, contact your internetservice provider.Proxy server address — Enter the address of the proxyserver.Proxy port number — Enter the port number of the proxyserver.WLAN internet access pointsSelect Menu > Settings and Connectivity >Destinations > Access point, and follow the instructions.To edit a wireless LAN (WLAN) access point, open one ofthe access point groups, and select an access point markedwith .Follow the instructions from your WLAN service provider.Select from the following:WLAN network name — Select Enter manually orSearch for networks. If you select an existing network,66 Connectivity |
Related manuals for Nokia N97 N97
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine