To select the desired flash mode, tap the current flashmode indicator, which is one of the following:Automatic, Reduce red, On, and Off.Avoid touching the flash LEDs when the back cover hasbeen removed. The LEDs may get hot after prolongedusage.Video lightTo increase light levels when recording video in low light,select .ScenesA scene helps you to find the right colour and lightingsettings for the current environment. The settings of eachscene have been set according to a certain style orenvironment.The default scene in image and video modes is indicatedwith (Automatic).To change the scene, select > Scene mode and ascene.To create your own scene suitable for a certainenvironment, selectUser defined and Edit. In the userdefined scene, you can adjust different lighting and coloursettings.To copy the settings of another scene, select Based onscene mode and the desired scene. To save the changesand return to the scenes list, select Back.To activate your own scene, select User defined > SelectCapture images in a sequenceSelect Menu > Applications > Camera.Sequence mode is available only in the main camera.To start capturing images in a quick sequence, select> Sequence. To close the settings window, select. Press and hold the capture key. The device capturesimages until you select Stop or until the memory runs out.The captured images are displayed in a grid. To view animage, select the image. To return to the sequence modeviewfinder, press the capture key.You can also use sequence mode with the self-timer.To deactivate sequence mode, select > Single shot.You in the image — self-timerUse the self-timer to delay the capture so that you caninclude yourself in the image.To set the self-timer delay, select > , and the delayneeded before the image is captured.To activate the self-timer, select Activate. The stopwatchicon on the screen blinks and the remaining time isdisplayed when the timer is running. The camera capturesthe image after the selected delay elapses. 95 Camera