Insert the memory cardA memory card may already be in the device. If not, dothe following:1. Remove the back cover of the device.2. Insert a compatiblememory card in the slot.Ensure that the contactarea on the card is facingdown and towards theslot.3. Push the card in. You canhear a click when the cardlocks into place.4. Replace the back cover. Keepthe device facing down whenreplacing the cover. Ensurethat the cover is properlyclosed.Remove the memory cardImportant: Do not remove the memory card inthe middle of an operation when the card is beingaccessed. Removing the card in the middle of anoperation may damage the memory card as well as thedevice, and data stored on the card may be corrupted.1. Before you remove the card, press the power key,and select Remove memory card. All applicationsare closed.2. When Removing memory card will close all openapplications. Remove anyway? is displayed,select Yes.3. When Remove memory card and press 'OK' isdisplayed, remove the back cover of the device.4. Press the memory card to release it from the slot.5. Pull out the memory card. If the device is switchedon, select OK.6. Replace the back cover. Ensure that the cover isproperly closed.Antenna locationsYour device may have internal and external antennas.As with any radio transmitting device, avoid touchingthe antenna area unnecessarily while the antenna istransmitting or receiving. Contact with such anantenna affects the communication quality and maycause the device to operate at a higher power levelthan otherwise needed and may reduce the batterylife.22 Get started
