Nokia SwitchTransfer contentYou can use the Switch application to copy contentsuch as phone numbers, addresses, calendar items,and images from your previous Nokia device to yourdevice.The type of content that can be transferred depends onthe model of the device from which you want totransfer content. If that device supportssynchronization, you can also synchronize databetween the devices. Your device notifies you if theother device is not compatible.If the other device cannot be switched on without aSIM card, you can insert your SIM card in it. When yourdevice is switched on without a SIM card, the Offlineprofile is automatically activated, and transfer can bedone.Transfer content for the first time1. To retrieve data from the other device for the firsttime, on your device, select Phone switch in theWelcome application, or select Menu > Settings >Connectivity > Data transfer > Phone switch.2. Select the connection type you want to use totransfer the data. Both devices must support theselected connection type.3. If you select Bluetooth connectivity as theconnection type, connect the two devices. To haveyour device search for devices with Bluetoothconnectivity, select Continue. Select the devicefrom which you want to transfer content. You areasked to enter a code on your device. Enter a code(1-16 digits), and select OK. Enter the same code onthe other device, and select OK. The devices are nowpaired.Some earlier Nokia devices may not have the Switchapplication. In this case, the Switch application issent to the other device as a message. To install theSwitch application on the other device, open themessage, and follow the instructions on the display.4. On your device, select the content you want totransfer from the other device.When the transfer has started, you can cancel it andcontinue later.Content is transferred from the memory of the otherdevice to the corresponding location in your device.The transfer time depends on the amount of data to betransferred.Synchronize, retrieve, or sendcontentSelect Menu > Settings > Connectivity > Datatransfer > Phone switch.After the first transfer, select from the following to starta new transfer, depending on the model:30 Get started
