To start capturing images in a quick sequence, select> Sequence. To close the settings window, select. Press and hold the capture key. The device capturesimages until you select Stop or until the memory runsout.The captured images are displayed in a grid. To viewan image, select the image. To return to the sequencemode viewfinder, press the capture key.You can also use sequence mode with the self-timer.To turn off sequence mode, select > Single shot.You in the image — self-timerUse the self-timer to delay the capture so that you caninclude yourself in the image.To set the self-timer delay, select > , and thedelay needed before the image is captured.To activate the self-timer, select Activate. Thestopwatch icon on the screen blinks and the remainingtime is displayed when the timer is running. Thecamera captures the image after the selected delayelapses.To switch off the self-timer, select > > .Tip: Select 2 seconds to keep your hand steadywhen capturing an image.Video recordingRecord a video1. To switch from image mode to video mode, ifnecessary, select > .2. To start recording, press the capture key, or select. A red record icon is displayed.3. To pause recording, select Pause. To resume, selectContinue. If you pause recording and do not pressany key within one minute, the recording stops.To zoom in or out, use the zoom keys.4. To stop recording, press the capture key. The videois automatically saved in Photos.Video recording on-screen controlsand indicatorsThe video viewfinder displays the following:1 — Capture mode indicator 103 Camera
