new mailbox replaces Mailbox in the Messaging mainview. You can have up to six mailboxes.Select Mailboxes and a mailbox to change theconnection settings, user settings, retrieval settingsand automatic retrieval settings.Connection settingsSelect Menu > Messaging and Options > Settings >E-mail > Mailboxes, a mailbox, and Connectionsettings.To edit the settings for the e-mail you receive, selectIncoming e-mail, and from the following:● User name — Enter your user name given to youby your service provider.● Password — Enter your password. If you leave thisfield blank, you are prompted for the passwordwhen you try to connect to your remote mailbox.● Incoming mail server — Enter the IP address orhost name of the server that receives your e-mail.● Access point in use — Select an internet accesspoint (IAP).● Mailbox name — Enter a name for the mailbox.● Mailbox type — Defines the e-mail protocol thatyour remote mailbox service provider recommends.The options are POP3 and IMAP4. This setting cannotbe changed.● Security — Select the security option used to securethe connection to the remote mailbox.● Port — Define a port for the connection.● APOP secure login (for POP3 only) — Use with thePOP3 protocol to encrypt the sending of passwordsto the remote e-mail server while connecting to themailbox.To edit the settings for the e-mail you send, selectOutgoing e-mail and from the following:● My e-mail address — Enter the e-mail addressgiven to you by your service provider.● Outgoing mail server — Enter the IP address orhost name of the mail server that sends your e-mail.You may only be able to use the outgoing server ofyour service provider. For more information, contactyour service provider.The settings for user name, password, access point,security, and port are similar to the ones in incominge-mail.User settingsSelect Menu > Messaging and Options > Settings >E-mail > Mailboxes, a mailbox, and User settings.Select from the following:● My name — Enter your own name. Your namereplaces your e-mail address in the recipient’sdevice if the recipient’s device supports thisfunction.● Send message — Define how e-mail is sent fromyour device. Select Immediately for the device toconnect to the mailbox when you select Send 65 Messaging
