8 Video clip file type9 Available recording time. When you are recording, thecurrent video length indicator also shows the elapsedand remaining time.10 The location to which the video clip is saved11 GPS signal indicatorAfter recording a video clipAfter you record a video clip, select from the followingoptions (available only if you have selected Options >Settings > Show last captured video > Yes):Play — Play the video clip you just recorded.— Upload the image to a compatible online album.Delete — Delete the video clip.To return to the viewfinder to record a new video clip,press the capture key.Camera settingsStill image camera settingsTo change the main settings, in image mode, selectOptions > Settings and from the following:Image quality — Set the resolution. The higher theimage resolution, the more memory the image consumes.Show captured image — View the image after it iscaptured, or continue image capturing immediately.Default image name — Define the default name forcaptured images.Capture tone — Set the tone that sounds when youcapture an image.Memory in use — Select where to store your images.Show GPS info — To add GPS location coordinates to eachimage file, select On. Receiving a GPS signal may take time,or the signal may not be available.Auto-rotate images — Select whether you want imagesthat are captured when the device is held upright to berotated when you open them in Photos.Restore camera settings — Restore the camera settingsto the default values.Video settingsTo change the main settings, in video mode, selectOptions > Settings and from the following:Video quality — Set the quality of the video clip. SelectSharing, if you want to send the video clip using amultimedia message. The clip is recorded with QCIFresolution, in the 3GPP file format, and the size is limitedto 600 kB (approximately one minute). You may not beable to send video clips saved in the MPEG4 file format ina multimedia message.Show GPS info — To add GPS location coordinates to eachfile, select On. Receiving a GPS signal may take time, or thesignal may not be available.Audio recording — Record sound.Show last captured video — View the first frame of therecorded video clip after the recording stops. To view theentire video clip, select Play .106 Camera