automatically or allow the test to be performed when thedevice asks for it, and the connectivity test is performedsuccessfully, the access point is saved to the internetdestinations.To view advanced settings, select Options > Advancedsettings. Changing the advanced settings for the WLAN is notrecommended.Access pointsCreate a new access pointSelect Menu > Settings and Connectivity > Destinations.You may receive access point settings in a message from aservice provider. Some or all access points may be preset foryour device by your service provider, and you may not be ableto change, create, edit, or remove them.When you open one of the access point groups ( , , ,), you can see the access point types:indicates a protected access pointindicates a packet data access pointindicates a wireless LAN (WLAN) access pointTip: You can create internet access points in a WLAN with theWLAN wizard.To create a new access point, select Access point.The device asks to check for available connections. After thesearch, connections that are already available are shown andcan be shared by a new access point.If you skip this step, you are asked to select a connectionmethod and to define the settings needed.To edit the settings of an access point, open one of the accesspoint groups, and select an access point. Follow theinstructions from your service provider.Connection name — Enter a name for the connection.Data bearer — Select the data connection type.Depending on the data connection you select, only certainsetting fields are available. Fill in all fields marked with Mustbe defined or with a red *. Other fields can be left empty,unless your service provider has instructed otherwise.To use a data connection, your service provider must supportthis feature, and if necessary, activate it for your SIM card.Create access point groupsSelect Menu > Settings and Connectivity > Destinations.Some applications allow you to use access point groups fornetwork connections.To avoid selecting a single access point every time the devicemakes a network connection, you can create a group thatcontains various access points to connect to that network anddefine the order in which the access points are used.66 Connectivity