You can also use sequence mode with the self-timer.You in the image — self-timerUse the self-timer to delay the capture so that you can includeyourself in the image.To set the self-timer delay, select > , and the delayneeded before the image is captured.To activate the self-timer, select Activate. The stopwatchicon on the screen blinks and the remaining time is displayedwhen the timer is running. The camera captures the imageafter the selected delay elapses.To switch off the self-timer, select > > .Tip: Select 2 seconds to keep your hand steady whencapturing an image.Video recordingRecord a video clip1 To switch from image mode to video mode, if necessary,select > .2 To start recording, press the capture key, or select . Ared record icon is displayed.3 To pause recording, select Pause. To resume, selectContinue. If you pause recording and do not press anykey within one minute, the recording stops.To zoom in or out, use the zoom keys.4 To stop recording, press the capture key. The video clipis automatically saved in Photos.Video recording on-screen controls and indicatorsThe video viewfinder displays the following:1 Capture mode indicator2 Audio mute on indicator3 Capture icon. Select to record video clips.4 Video light indicator5 Recording settings. Select to change settings.6 Battery charge level indicator7 Video quality indicator. To change this setting, selectOptions > Settings > Video quality.8 Video clip file type9 Available recording time. When you are recording, thecurrent video length indicator also shows the elapsedand remaining time.10 The location to which the video clip is saved11 GPS signal indicator96 Camera