133. Close the memory card slot door.Remove a memory card1. Open the memory card slot door.2. Push the card gently to release it. Wait until Remove memory card and press'OK' is displayed. Pull the card out.3. Close the memory card slot door.■ Charge the batteryConnect the charger to a wall socket. Connectthe charger to the device.If the battery is completely discharged, it maytake a few minutes before the chargingindicator appears on the display or before anycalls can be made.The charging time depends on the charger andthe battery used. Charging a BP-5M batterywith the AC-4 charger takes approximately80 minutes.■ Switch the device on or offPress and hold the end key.If the device asks for a PIN code, open the slide, enter the PINcode, and select OK.If the device asks for the lock code, enter the lock code, andselect OK. The factory setting for the lock code is 12345.■ Set time and dateTo set the correct time zone, time, and date, select the country you are in, andenter the local time and date.
