32image can be sent as a multimedia or e-mail message or through a Bluetoothconnection.To send your cursor position on the map to a compatible device, for example as anSMS or MMS, select it and Send cursor position > Via text message or Viamultimedia.To save data, such as current GPS or cursor position to your device, selectOptions > Save and the data to be saved.You can add a location, for example, a cursor position, in Contacts. Select Savecursor position > New contact.■ Plan trips1. In the navigator application, select Options > Trips > Plan new route. Enter theroute name, and select Save.2. Select Departure > Set departure to search, and select the departure point ofthe trip.3. Select Destination > Set destination to search, and select the destination pointof the trip.4. To add waypoints to your route, select Options > Add waypoint, and searchand select the waypoint to be added.5. To start the trip, select Options > Start navigation and the first visit of the trip.If navigation is in progress and you want to start a new navigation, aconfirmation is asked. To abort the ongoing navigation and start the new trip,select Yes. To continue the previous navigation, select No.To change the order of the waypoints, select the waypoint to be moved, Options >Move, and the direction to which you want to move the waypoint.SettingsTo change the navigator application settings, select Options > Settings and thefeature you wish to modify. For example, to choose specific points-of-interest tobe displayed on the map, select Map > Show points-of-interest and the desiredcategories.To configure the behaviour of voice instructions during a phone call, selectNavigation > Call handling > Dim instructions to set the voice instructions to alower level than the phone conversation, Call and instructions to have the voice