Nokia NBB5005000 - IP VPN 5i Installation Manual
                                                | |
Contents
| 
2 Installing a Nokia 5i and 10i Gateway24 Nokia 5i and 10i Installation GuideTable 3 describes the connections on the rear panel of the Nokia 5i andNokia 10i.Resetting the Gateway to Factory DefaultA reset button is located on the rear panel and is used to reboot and reset theNokia 5i and 10i gateways.CautionThe following action results in the loss of all security services andpasswords.Table 3 Rear Panel connection descriptions of the Nokia 5i and Nokia 10iLabel DescriptionConsole The console port is a 9-pin male connector that can be connectedto the serial (COM) port of the computer or network device. Youcan then use the command-line interface (CLI) through a serialprogram such as HyperTerminal to communicate with the device.3 Ethernet port (RJ-45) used for connecting computers or othernetwork devices.2 Ethernet port (RJ-45) used for connecting computers or othernetwork devices.1 Ethernet port (RJ-45) used for connecting computers or othernetwork devices.Auxiliary The auxiliary port (AUX) or dial-in port is a 9-pin male connector.This port is used to dial in to the Nokia 5i and Nokia 10i through amodem when the Nokia 5i or Nokia 10i is unreachable throughother ports.Power A power jack for supplying power to the device. Connect thepower adapter to this jack. |
Related manuals for Nokia 10i
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine