Performing the Initial Hardware ConfigurationNokia 5i and 10i Installation Guide 31System Status LEDsYou can monitor the basic operation of the gateway and network interfaces bychecking their status LEDs. The system status LEDs are located on the frontpanel of the gateway.Figure 4 System Status LEDs for the Nokia 5i and Nokia 10iTable 5 describes the LEDs on the Nokia 5i and Nokia 10i front panel.Table 5 System Status LEDs for the Nokia 5i and Nokia 10iLED DescriptionPWR Off: Device not powered on.Steady green: Device is on.STAT Off: Device off.Steady green: Device passed hardware test and finished booting.Steady red: Hardware or software error. No recognizable bootdevice with a valid kernel found, or kernel panic.Steady amber: Booting.Blinking green: Device passed hardware check and is fully booted.Software is operating normally.00418321
