CameraIf you select a new scene, the color and lighting settingsare replaced by the selected scene. See “Scenes”, p. 15.You can change the setup settings after selecting a sceneif needed.ScenesA scene helps you to find the right color and lightingsettings for the current environment. Select a proper scenefor taking pictures or recording video clips from the scenelist. The settings of each scene have been set according toa certain style or environment.Scenes are only available in the main camera.Use the scroll key to scroll through the active toolbar, andselect from the following options:Video scenesTo make your own scene suitable for a certainenvironment, scroll to User defined, and select Options >Change. In the user defined scene you can adjust differentlighting and color settings. To copy the settings of anotherscene, select Based on scene mode and the desired scene.Take pictures in a sequenceThe sequence mode is available only in the main camera.To set the camera to take six pictures or more in asequence (if enough memory is available), in the activetoolbar, select Switch to sequence mode.To take six pictures, press the capture key. To take morethan six pictures, press and hold the capture key. To stoptaking pictures, release the capture key. You can captureup to 100 images, depending on the available memory.