Camera You in the picture—self-timerThe self-timer is available only in the main camera.Use the self-timer to delay the capture so that you caninclude yourself in the picture. To set the self-timer delay,in the active toolbar, select Self timer > 2 seconds, 10seconds, or 20 seconds. To activate the self-timer, selectActivate. The device beeps when the timer is running. Thecamera takes the picture after the selected delay elapses.To switch off Self timer, in the active toolbar, select Selftimer > Off.You can also use the self-timer in the sequence mode.Tip! In the active toolbar, select Self timer > 2seconds to keep your hand steady when takinga picture.3 Select Stop to stop recording. The video clip isautomatically saved to the Images & video folder ofGallery. See “Gallery”, p. 19. The maximum length ofthe video is 60 minutes (if enough memory is available).To pause recording at any time, press Pause. The pauseicon ( ) blinks on the display. Video recordingautomatically stops if recording is set to pause and thereare no keypresses within a minute. Press the capture keyagain to resume recording.To zoom in or out of the subject, press the zoom key on theside of the device.To make lighting and color adjustments before recordinga video, use the scroll key to scroll through the activetoolbar. See “Setup settings—Adjust color and lighting”,p. 14 and “Scenes”, p. 15.To free memory before recording a video, select Options >