Nolangroup N-Com B901 S Series User Instructions And Safety

Nolangroup N-Com B901 S Series User Instructions And Safety Manual pdf 19 page image

1914.4.Smart Conference (Group Intercom)Thanks to the “Smart Conference” function, you can start the conference communication between N-Com intercom systems of the “900” series previously paired up and saved in the 3 available channels.All systems must be turned on and available within the connection range.1. Each system must have been previously paired up to all the other systems: B, C and D.2. Any system can press at the same time the “5” and “5” keys to activate the GroupConference or to start a conference communication between all the systems.3. In the case where one of the systems presses the “ON” key or falls outside the connectionrange, the group intercom is interrupted.Smart Conference connectionPress at the same time the “5” and “5”. Activation is confirmedby a beep in the helmet and by the voice message “GroupIntercom”.Smart Conference disconnection Briefly press the “ON” key. Disconnection is confirmed by thevoice announcement “Group Intercom terminated”.N.B.: During a “Smart Conference” call, connection to the mobile phones of all participants istemporarily cut off. When the conference call ends, all phones automatically reconnect to their ownintercom system.Note: The “Smart Conference” mode can be used EXCLUSIVELY with “900” series N-Com systems”.Note: The “Smart Conference” mode CANNOT be used with systems paired up in Universal Intercommode (chapter 15.1).