Nolangroup N-Com B901 S Series User Instructions And Safety

Nolangroup N-Com B901 S Series User Instructions And Safety Manual pdf 22 page image

EN2216. REMOTE CONTROLThe B901 device can be controlled by using a remote control (sold separately), so that you do nothave to take your hands off the handlebars to use the keypad.The N-Com system is compatible with the RC4 Remote Control by SENA.The following table shows the correspondence of the keys:N-COM SYSTEM ▲ ▼ ON NSENA RC4 + - CENTRAL BUTTON MULTI-FUNCTION BUTTONProceed as follows to pair up the N-Com system to the RC4 Remote Control:• Make sure the RC4 is switched off.• Put the RC4 in pair up mode: press the key “+” and keep it pressed for about 8 seconds.• Make sure the B901 is switched off.• Put the B901 system in the “Configuration” menu: press the “ON” key and keep it pressed for 4seconds, until you hear the voice announcement “Configuration”.• Press button “5” to access the “Remote control pair up” mode.• Press the “ON” button on the N-Com system keypad.• After a few seconds, the connection between the two devices is confirmed by the voiceannouncement “Remote control connected”.N.B.: The affiliation is saved by both the helmet and the remote control and it is not lost when the twosystems are turned off. Hence this procedure must only be carried out once.