Norac UC4+ Installation Manual

Also see for UC4+: Installation manual Manual Installation manual Operator's manual Operator's manual

Contents

Norac UC4+ Installation Manual Manual pdf 15 page image

124.4 M AIN LIFT SENSOR I NSTALLATION1. Assemble the main lift sensor bracket(B11) as shown in Figure 10.Figure 10 - Main Lift Sensor Bracket2. The bracket can then be mounted to thelowest frame member on the centersection of the sprayer. The bracketshould be mounted so the sensormounting collar is in approximately thecenter of the sprayer and ahead of theboom (Figure 11 and Figure 12).The sensor mounting collar mustnot be behind the sprayer’s wheel.The General Mounting Rules forUC4+ Ultrasonic Sensors, from theprevious section, must be followed.Figure 11 – Main Lift Sensor BracketMounting Position3. Mount the sensor onto the sensormounting collar (Figure 11).Figure 12 – Main Lift Sensor Mounted inthe Correct LocationBracket TubeSensorMounting TabSensor MountingCollarBracket Base

/ 35

Related manuals for Norac UC4+

Norac UC4+ Installation Manual

This manual is suitable for:

UC4+FLEXICOIL

manualsdatabase

Your AI-powered manual search engine