NordicTrack A.c.t. 10 Elliptical Manual

Contents

8• Assembly requires two persons.• Place all parts in a cleared area and remove thepacking materials. Do not dispose of the packingmaterials until you nish all assembly steps.• Left parts are marked “L” or “Left” and right partsare marked “R” or “Right.”• To identify small parts, see page 7.• In addition to the included tool(s), assemblyrequires the following tool(s):one Phillips screwdriverone rubber malletAssembly may be easier if you have a set ofwrenches. To avoid damaging parts, do not usepower tools.ASSEMBLY1. Go to www.nordictrackservice.com/registration on your computer and registeryour product.• activates your warranty• saves you time if you ever need to contactCustomer Care• allows us to notify you of upgrades and offersNote: If you do not have Internet access, callCustomer Care (see the front cover of thismanual) and register your product.12. Remove the four screws and the four shippingbrackets (only one of each is shown) from theFrame (1). Discard the screws and the shippingbrackets.Then, tighten the four Leveling Feet (52)(only one is shown) into the underside of theFrame (1).2521Shipping BracketScrew