NordicTrack VGR940 NTEL08990 User Manual

Also see for Vgr 940: User manual Manual Manual Del Usuario Manuel de l'utilisateur Manuale d'istruzioni

Contents

NordicTrack VGR940 NTEL08990 User Manual Manual pdf 5 page image

5ASSEMBLYAssembly requires two people. Place all parts of the elliptical crosstrainer in a cleared area and remove thepacking materials. Do not dispose of the packing materials until assembly is completed. In addition to the twoincluded allen wrenches, assembly requires a phillips screwdriver , an adjustablewrench , and a rubber mallet .As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly.The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST onpage 18. The second number refers to the quantity used in assembly. Note: Some small parts may have beenpre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.1. Identify the Rear Stabilizer (59), which has Wheels (45)attached to it.Attach the Rear Stabilizer (59) to the rear of the Frame(1) with the two Rear Stabilizer Bolts (60) and two M10Nylon Locknuts (26). Make sure that the RearStabilizer is turned so the Wheels are not touchingthe floor.261604526 591Rear Stabilizer Bolt (60)–2M10 Nylon Locknut (26)–6Pedal Screw (43)–6Incline Axle Screw (30)–2Plastic PedalSpacer (85)–2M8 SplitWasher (58)–2Chrome TubeWasher (84)–2M8 Washer (33)–2Front Stabilizer Bolt (86)–22. Attach the Front Stabilizer (14) to the front of theFrame (1) with the two Front Stabilizer Bolts (86) andtwo M10 Nylon Locknuts (26).8614262612