Safety 1-5 2011 Nordson Corporation Issued 10-11Maintenance and Repair Practices Allow only personnel with appropriate training and experience to operateor service the equipment. Perform scheduled maintenance activities at the intervals described inthis document. Relieve system hydraulic and pneumatic pressure before servicing theequipment. De‐energize the equipment and all auxiliary devices before servicing theequipment. Use only new Nordson‐authorized refurbished or replacement parts. Read and comply with the manufacturer's instructions and the MSDSsupplied with equipment cleaning compounds.NOTE: MSDSs for cleaning compounds that are sold by Nordson areavailable at www.nordson.com or by calling your Nordson representative. Confirm the correct operation of all safety devices before placing theequipment back into operation. Dispose of waste cleaning compounds and residual process materialsaccording to governing regulations. Refer to the applicable MSDS orcontact the authority having jurisdiction for information. Keep equipment safety warning labels clean. Replace worn or damagedlabels.Equipment Safety InformationThis equipment safety information is applicable to the following types ofNordson equipment: hot melt and cold adhesive application equipment and all relatedaccessories pattern controllers, timers, detection and verification systems, and allother optional process control devices
