Maintenance 5-7Part 1089210A04 2010 Nordson CorporationFigure 5-5 Retaining Bar Removal5. Carefully slide the two reflectors from the lamphead base.NOTE: Great care should be taken when replacing reflectors as they aremade of glass and may break if dropped or forced.Figure 5-6 Reflector Removal6. Slide the new reflectors into the lamphead base.NOTE: The inside edge of the reflector should slide into the notches of thewhite retainers.7. Set the retaining brackets in place. The placement of the retainingbrackets differs between focus and flood reflectors.Focus Reflectors: See Figure 5-7. The edge of the reflector will sit onthe retainer springs on the inside edge of the bracket.The lip on the focus bracket will go to the inside of the lamphead andwrap around the reflector. Line up the retaining bracket mounting holeswith the mounting holes in the lamphead base.
