System Setup 2-9Part 1612500−02 2018 Nordson CorporationTo provide air to your system, an input air kit with connectors, couplings,and 10-mm air tubing (15-ft for dolly systems, 25-ft for rail mount systems)is available.Refer to the Parts section for filter kits, replacement elements, and input airkit part numbers and ordering information.Mobile SystemsConnect 10-mm air tubing from your compressed air supply to the air inputfitting on the rear panel of the dolly.Rail Mount SystemsSee Figure 3-9.1. Use the mounting bracket (4) as a template to mark and drill mountingholes in the selected mounting surface. Make sure there is sufficientclearance to connect air tubing and change the filter element.2. Install the two male connectors (2) included in the kit in the filter inputand output ports.3. Install the mounting bracket on the filter, using the included M5 screws(3), on the side of the filter opposite the release latch (6).4. Mount the filter with customer-supplied fasteners (7).5. Note the orientation of the flow indicator (5) on the top of the filter. Cut10-mm blue air tubing to the required lengths to connect the air supplyto the filter and the filter to the controller, then connect the tubing.112234657FROM SUPPLYTO CONTROLLERFigure 2-9 Air Filter Installation − Wall and Rail Mount Systems1. 10-mm air tubing (blue)2. 10-mm tube x 1/2 male connectors3. M5 screws4. Bracket5. Flow indicator6. Release latch7. Customer-supplied fasteners

Safety

Personal Safety

Grounding

System Setup

System Connections

System Setup and Connections

Spray Gun Connections

Air Tubing and Powder Hose

Pump and Hopper Connections

Connecting the Powder Hose to the Pump

Mobile Systems

System Electrical Connections

Entering Configuration Mode

Function Settings

Description

Mobile System Components

Equipment Labels

Operation

Displays and LEDs

Custom Electrostatic Mode

Classic AFC Mode

Powder Flow Settings

Smart Flow Mode Settings

Classic Flow Mode Settings

Spray Gun Operation

Purging

Maintenance

Cleaning Flat and Corner Spray Nozzles

Daily Maintenance

troubleshooting

General Troubleshooting Chart

Spray Gun Power Supply Resistance Test

Electrode Support Resistance Test

Gun Cable Continuity Test

Repair

Power Supply Replacement

Powder Path Installation

Gun Reassembly

Changing From Conical to Flat or Corner Spray Nozzle

Cable Replacement

Cable Installation

Switch Installation

Electrode Support Assembly Replacement − XD Version

Electrode Support Assembly Replacement − SD Version

Controller Repair

Rear Panel Components

System Part Numbers

Spray Gun

Electrode Support Assemblies

Spray Gun Options

Controller Parts

Front Panel and Internal Cabinet Ground Parts List

Rear Panel Parts Illustration

Rear Panel Parts List

Manifold Illustration and Parts List

System Components and Parts

System Options

Wiring Diagram

Nordson Encore Series Customer Product Manual

Specifications

Bundling Tubing and Cable

System Air Supply

Power Supply

Daily Operation

Cleaning Conical Nozzles and Deflectors

Shutdown

Troubleshooting

Trigger Switch Replacement

Parts

Rear Panel Parts

Manifold Parts

declaration of conformity

Encore LT

nordson corporation

Part

Controller Wall Mounting

Controller Connections

VBF System Setup

Feed Hopper and Wall/Rail Mount System Setup

Coupling Installation

Controller Configuration

Issued

Vibratory Box Feeder Operation

Changing Flat Spray Nozzles

Changing Conical Nozzles and Deflectors

Installing the Optional Pattern Adjuster Kit

Powder Path Replacement

Vibrator Motor Replacement

Spray Gun Parts Illustration

Spray Gun Parts List

Flat Spray Nozzles

Degree Corner-Spray Nozzle

Conical Nozzle, Deflectors and Electrode Assembly Parts

Pattern Adjuster Kit

Ion Collector Kit

Powder Hose and Air Tubing

Optional Transportable Manual System

Encore PE

Encore Series