Operation 4-3Part 1612500−02 2018 Nordson CorporationRe-Coat Metallics Deep RecessesFigure 4-2 Select Charge ModesNOTE: If you press the STD/AFC selection button while using a SelectCharge mode, the controller switches to Classic or Custom mode.Custom Electrostatic ModeCustom Mode is the factory default electrostatic mode.In Custom mode, both kV output and micro ampere (μA) output limits canbe adjusted independently. Both the kV and AFC LEDs light to indicate thatthe controller is in this mode.Use the View button to toggle the display between kV and μA. Pressthe + or − buttons to select the desired setpoints. The longer a button ispressed the faster the units change. The valid AFC range is 5−100 μA. The valid STD range is 0 or 25−100 kV.Classic Electrostatic ModeClassic Mode is the optional electrostatic mode. The controller must beconfigured to use this mode; refer to page 2-11 for configurationinstructions.In Classic mode you can choose to control kV (STD) output or μA (AFC)output, but not both at the same time.Classic Standard (STD) ModeSee Figure 2-3. Use the STD mode to set the no-load output voltage (kV).1. Press the STD/AFC button to toggle between STD and AFC.The LEDs light to show which is selected. Select STD. The STD LEDwill light.2. Press the View button to toggle the display between kV and μA.Press the + or − buttons to select the desired kV setpoint. The longer abutton is pressed the faster the units change.The valid STD range is 0 or 25−100 kV.

Safety

Personal Safety

Grounding

System Setup

System Connections

System Setup and Connections

Spray Gun Connections

Air Tubing and Powder Hose

Pump and Hopper Connections

Connecting the Powder Hose to the Pump

Mobile Systems

System Electrical Connections

Entering Configuration Mode

Function Settings

Description

Mobile System Components

Equipment Labels

Operation

Displays and LEDs

Custom Electrostatic Mode

Classic AFC Mode

Powder Flow Settings

Smart Flow Mode Settings

Classic Flow Mode Settings

Spray Gun Operation

Purging

Maintenance

Cleaning Flat and Corner Spray Nozzles

Daily Maintenance

troubleshooting

General Troubleshooting Chart

Spray Gun Power Supply Resistance Test

Electrode Support Resistance Test

Gun Cable Continuity Test

Repair

Power Supply Replacement

Powder Path Installation

Gun Reassembly

Changing From Conical to Flat or Corner Spray Nozzle

Cable Replacement

Cable Installation

Switch Installation

Electrode Support Assembly Replacement − XD Version

Electrode Support Assembly Replacement − SD Version

Controller Repair

Rear Panel Components

System Part Numbers

Spray Gun

Electrode Support Assemblies

Spray Gun Options

Controller Parts

Front Panel and Internal Cabinet Ground Parts List

Rear Panel Parts Illustration

Rear Panel Parts List

Manifold Illustration and Parts List

System Components and Parts

System Options

Wiring Diagram

Nordson Encore Series Customer Product Manual

Specifications

Bundling Tubing and Cable

System Air Supply

Power Supply

Daily Operation

Cleaning Conical Nozzles and Deflectors

Shutdown

Troubleshooting

Trigger Switch Replacement

Parts

Rear Panel Parts

Manifold Parts

declaration of conformity

Encore LT

nordson corporation

Part

Controller Wall Mounting

Controller Connections

VBF System Setup

Feed Hopper and Wall/Rail Mount System Setup

Coupling Installation

Controller Configuration

Issued

Vibratory Box Feeder Operation

Changing Flat Spray Nozzles

Changing Conical Nozzles and Deflectors

Installing the Optional Pattern Adjuster Kit

Powder Path Replacement

Vibrator Motor Replacement

Spray Gun Parts Illustration

Spray Gun Parts List

Flat Spray Nozzles

Degree Corner-Spray Nozzle

Conical Nozzle, Deflectors and Electrode Assembly Parts

Pattern Adjuster Kit

Ion Collector Kit

Powder Hose and Air Tubing

Optional Transportable Manual System

Encore PE

Encore Series