Nortech CRC200R User Manual
                                           | |
Contents
| 
CRC200R USER GUIDE ISSUE 025-9Display ActionS e t A P B M o d eA P B n oUse the key to toggle between ‘’yes’ and ‘no’, then press . Ifyou change the state, the unit will take a moment to initialise all cardsto that state. Also if you select ‘no’, the unit will skip to the next sub-menu option. If you select ‘yes’ then it will continue as follows:S e t A P B M o d eA P B H o u r 0 : 2 5You may then enter an hour in the 24-hour clock (0 to 23). At thishour every day the Anti-passback will initialise, allowing all cards towork on all valid readers.‘0’ = midnight, any number above 23 will disable this ‘APB Hour’.On pressing you then have a further three ‘APB Hours’ (1 to 3),which you can set in the same way.Note 1: When APB is active, anti-passback initialisation takes place when the CRC200R ispowered up. This process may take several seconds to complete depending upon thenumber of cards in the memory.Pressing after the last APB hour will take you to the next sub-menu item.5.5.3 Date/TimeThis sub-menu item allows you to adjust the time and date in the unit’s real time clock.This sub-menu item is automatically selected when the final parameter of ‘APB Mode’ has beenentered.To reach this sub-menu item from the initial display, press once and then press repeatedlyuntil the ‘Installer’ screen is displayed, press once again to enter the sub-menu, and pressrepeatedly until the following screen is displayed:D a t e / T i m ePress and carry out the following procedure:Display ActionD a t e / T i m eY e a r : x x Enter the year as two digits and press .D a t e / T i m eM o n t h : x x Enter the month in two-digit format and press .D a t e / T i m eD a t e : x x Enter the day of the month as two digits and press . |
Related manuals for Nortech CRC200R
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine