Using the Passport 8100 Modules1-4 204515-C• A command line interface (CLI) for managing the Passport 8100 switch,accessible through the Passport 8190SM module or through a TelnetconnectionIf a Passport 8190SM module is not installed, the CLI is accessible throughthe Comm port on the Passport 8132TX module.• Support for up to eight simultaneous Telnet sessions with optional passwordprotection• Device Manager support• Web-based monitoring support• SNMPv1 and SNMPv2 agent support• Upgradable device firmware in nonvolatile flash memory using the TrivialFile Transfer Protocol (TFTP)• Optional PCMCIA card for file management• Up to 2,000 VLANs defined by port or network protocolPassport 8190SM Management ModuleThe Passport 8190SM Switch Management Module (Figure 1-1) providescentralized management capabilities for the Passport 8010 and 8006 chassis. Usethis module to configure and manage all 8100 Series modules in the chassis.Figure 1-1. Passport 8190SM Switch Management Module9673EAOnlineTemp2Fan1MasterPower Supply10025 50 75321Modem (DTE) PCMCIAUtilization %CPULink100 ResetConsoleDCE|DTEManagement1 2 3 4 5 61 = Ethernet Management Port2 = DCE/DTE Switch3 = Console/Modem Ports4 = Reset Button5 = PCMCIA Card Slot6 = LEDs